Yaesu FTM-100DR Instruction Manual page 38

1
Press for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
3
Turn the DIAL, select [23 SmartBeaconing], then
press .
4
Turn the DIAL and select [1 STATUS].
5
and select [TYPE 1].
Press
Each time
between OFF, TYPE 1, TYPE 2, and TYPE 3.
Tip When TYPE 1, TYPE 2, or TYPE 3 is selected, the settings from [2 LOW SPEED] to [8 TURN
TIME] are enabled.
6
Press .
7
Turn the DIAL, select [14 BEACON TX], then press
.
8
Turn the DIAL and select [1 AUTO].
9
Press and select SMART.
The sorting condition will switch between ON, OFF,
and SMART each time
10
for one second or longer.
Press
The display will return to the previous screen.
The " " icon will be displayed, and SmartBeaconing™ will be set.
Tips
• The default TYPE 1 - TYPE 3 settings are the same when shipped from the factory. When operating
SmartBeaconing™ under a different setting, select "TYPE 2" or "TYPE 3" in Step 4 and then change
the setting under [2 LOW SPEED] - [8 TURN TIME].
• When SmartBeaconing™ is in operation, all "2 INTERVAL", "3 PROPORTIONAL", "4 DECAY", "5
LOW SPEED" and "6 RATE LIMIT" settings under [10 APRS] → [14 BEACON TX] in the set-up
menu will become void.
is pressed, the setting will switch
is pressed.
*SmartBeaconing
TM
Transmitting APRS Beacons
.
is a function provided by HamHUD Nichetronix.
37