Aprs Reception Pop-Up Setting - Yaesu FTM-100DR Instruction Manual

3
Turn the DIAL, select [6 APRS MUTE], then press
.
4
Turn the DIAL and select ON or OFF.
1 ON: mutes APRS band audio reception.
2 OFF: Lets you hear the sound being received by
adjusting the APRS band volume settings.
Tip Factory default value:2 OFF
5
Press for one second or longer.
Sets the APRS operating bandmuteand returns to the previous screen.

APRS reception pop-up setting

This sets the display time of the pop-up that appears when a APRS beacon and
message is received.
1
Press for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
3
Turn the DIAL, select [7 APRS POP-UP], then press
.
The screen for setting the pop-up display time will
be displayed.
4
Turn the DIAL and select [1 BEACON].
5
Press to select the pop-up time for each time a
beacon is received.
The pop-up time changes in the following order each
time it is pressed.
"OFF", "3 sec", "5 sec", "10 sec", "HOLD"
Tip
Factory default value: 10 sec
6
Turn the DIAL and select [2 MESSAGE].
7
Press to select the pop-up time for each time a
message is received.
The pop-up time changes in the following order each
time it is pressed.
"OFF", "3 sec", "5 sec", "10 sec", "HOLD"
Tip Factory default value: 10 sec
Using the APRS set-up menu
.
60