Download Print this page
Yaesu FTM-10R - QUICK CODE SHEET Manual
Yaesu FTM-10R - QUICK CODE SHEET Manual

Yaesu FTM-10R - QUICK CODE SHEET Manual

Smart menu key
Hide thumbs Also See for FTM-10R - QUICK CODE SHEET:

Advertisement

Top panel
/
keys, and the
Display
Press the
AF DUAL
Press the
ARTS
Press the
DIMMER
Press the PTT switch to activate the sound of a Gong Bell.
HORN 1
Press the PTT switch to activate the sound of a UFO in flight.
HORN 2
Press the PTT switch to activate the sound of a klaxon.
HORN 3
Press the PTT switch to activate the sound of a siren.
HORN 4
Press the
INTERCOM
Press the
MONI
Press the PTT switch to route your amplified voice through the PA speaker.
PA
Press the
REVERSE
Press the
SCAN
Press the
SQL LEVL
Press the
SSCH
Press the
TCALL
Press the
TX POWER
Press the
VOL.ITCOM
When one of the above features does not appear in the list, it is because that feature is not assigned to the top panel
/
keys. Please insure the Smart Menu "F14 FKEY MOD" is set to "FNC" or "FNC+MSG".
Press and hold the
key for one second to enter the Memory Channel Set Mode.
Display
Assigns/Eliminates the memory channel to/from the Memory Group Memory bank.
M 1
GROUP
Changes the memory channel number to the desired vacant memory channel number.
M 2
MEM CH
Sorts and renumbers the Memory Channels by frequency, from low to high.
M 3
MEM SORT
Appends an Alphanumeric "Tag" (label) to a memory channel.
M 4
MEM TAG
Sets the Scan Type (Skip Memory or Preferential Memory).
M 5
SCN TYPE
Set the Preferential Scan List.
M 6
SKIPONLY
Sets the Squelch Threshold Level.
M 7
SQL LEVL
Change the CTCSS Tone Frequency.
M 8
SQL TSQF
Change the DCS Code.
M 9
SQL DCS
Change the Squelch Type (CTCSS or DCS).
M10
SQL TYPE
Stores an independent (in band) transmit frequency (Odd Split).
M11
TX SHIFT
Change the Transmitter Power Level.
M12
TX POWER
Deletes memorized data (except CLUB memory channel).
M13
DELETE
Press and hold the [ VOL/SEL ] key for one second to enter to the Clock/Timer Set Mode while the clock/timer
function is activated.
Display
Set up the Clock.
T 1
TIME ADJ
Set an alarm beep which will sound every "00" minutes.
T 2
CLOCK BP
Change the Clock Format.
T 3
T FORMAT
Change the Time System.
T 4
12H/24H
Stop Watch Timer allows programming a timed interval when a beep will sound and
T 5
TMR BEEP
the white LED will flash.
Selects the Automatic Power Off time (time before power goes off).
T 6
APO
Smart Menu Key
key select and enable operation of the following features.
key to activate the AF Dual function.
key to activate the ARTS feature.
key to enable adjustment of the display illumination level by the DIAL knob.
key to activate the Intercom mode.
key to disable noise and tone squelch.
key to activate the Reverse feature.
key to activate the scanner.
key to activate the Smart Search.
key to enable adjustment of the noise squelch threshold level by the DIAL knob.
key to activate the 1750 Hz Tone Burst.
key to change the transmit power level.
key to change the receiver audio level of the intercom receiver.
Memory Set Mode
Clock/Timer Set Mode
Function
Function
Function
Page
25
26
27
27
27
27
27
28
28
29
29
30
31
30
32
32
32
Page
36
37
37
38
39
39
40
40
41
41
42
43
43
Page
53
84
83
84
84
85

Advertisement

loading

Summary of Contents for Yaesu FTM-10R - QUICK CODE SHEET

  • Page 1 Smart Menu Key Top panel keys, and the key select and enable operation of the following features. Display Function Page Press the key to activate the AF Dual function. AF DUAL Press the key to activate the ARTS feature. ARTS Press the key to enable adjustment of the display illumination level by the DIAL knob.
  • Page 2: Menu Mode

    Menu Mode Press and hold the [ VOL/SEL ] key for one second to enter to the Menu Mode while the VFO mode or Memory mode. Display Function Page Enables/Disables the Automatic Audio Volume Controller. F 1 AF AUTO Enables/Disables the AF DUAL operation. 25, 62 F 2 AF DUAL Select the Tone Pitch control for the received audio.

This manual is also suitable for:

Ftm-10r10srFtm-10sr