Yaesu FTM-100DR Instruction Manual page 16

● Viewing the contents of a beacon
The contents of the beacon will be displayed in the following screen.
①
⑥
➀ Symbol
➁ Compass
➂ Number
➃ Station name
➄ Transmitting station
information
➅ [ ]
➆ [ ]
➇ [ ]
]
➈ [
Tips
• When the power supply of the main device is switched on, the position and distance will not be
displayed if the detailed screen is displayed before the GPS is captured.
• The transmitting station's information and comments can be scrolled one line at a time by turning
the DIAL.
② ③
⑦
Display explanation
Symbol of transmitting station
For overlay symbols, the characters will be displayed at the top left.
Display the direction of the transmitting station as seen from your own
station
N-UP: North is always displayed at the top.
H-UP: The direction in which you are heading is always displayed at the
top.
Entry number in station list
Call sign, object name, or item name of a transmitting station
Information and comments of transmitting station
The expansion key switches when
When is pressed, the display moves to the beginning of the
information.
When is pressed, the frequency information embedded in the target
station can be set in a band separate from the APRS operating band.
When is pressed, the message editing screen is displayed.
15
Receiving APRS Beacons
④
⑧ ⑨
is pressed.
⑤