Analog Devices ADUC812 Get Started Manual page 22

(6.0) I
NSTALLED
Installing the MicroConverter
the MicroConverter products at C:\ADuC\Documentation. Directories for each product exist in the
Documentation folder, as well as QuickStartTools and TechNotes directories.
Each of the product directories follows a similar folder structure as shown below. All Technical
Notes for any of the MicroConverter products appear in the \TechNotes directory. Check our website
for the latest tech notes
C:\ADuC\Documentation\ADuC8XX\
DataSheets\
ADuC8XX_Y.pdf
Errata8XX_Y.pdf
8XXqrefY.pdf
EvalDocs\
8XXEvalGuide_Y.pdf
8XXPCB_Y.pdf
8XXgbrs\8XXgbrs_Y.zip
Other\
8XXFAQs_Y.pdf
8XXgetstartedY.pdf
U
SERGuideDRAFTY.pdf
It is recommended that all documentation mentioned above be reviewed before starting the
QuickStart Development System.
Installed Code Locations
Installing the MicroConverter
directory for each MicroConverter products at C:\ADuC\Code. Product directories (e.g. ADuC832
below) for each MicroConverter exist with Assembly code examples.
C:\ADuC\Code\832\
ADC
DAC
DualDPTR
FlashEE
I2C
Misc
PDown
PSMon
SP
SPI
TIC
Uart
WDTimer
C example code is available in the C-Code directory. C-Code for the ADuC832 is in the \832 folder.
C:\ADuC\C-Code\832\
ADC
DAC
MISC
PDOWN
PLL
TIC
REV 1.3
D
OCUMENTATION AND
®
QuickStart™ Development System CD installs documentation for all
(www.analog.com/microconverter
ADuC8XX DataSheet version Y
ADuC8XX Errata Sheet version Y
ADuC8XX Quick Reference Guide version Y
ADuC8XX Eval Board Reference Guide version Y
ADuC8XX Eval Board Schematic version Y
ADuC8XX Eval Board Gerber files version Y.
ADuC8XX Frequently Asked Questions version Y
Get Started Guide version Y
Draft User guide version Y
®
QuickStart™ Development System CD installs an Assembly code
- code examples for the ADC
- code examples for the DAC
- code example for using the Dual Data Pointer
- code example for using the Flash/EE Data Memory
- code examples for I2C master and slave operation
- Miscellaneous MicroConverter code example
- code example demonstrating powerdown mode
- code example for the power supply monitor
- code example for the extended stack pointer
- code examples for SPI master and slave operation
- code example for the Time Interval counter
- code examples for configuring the UART
- code example for watchdog timer
- code examples for the ADC
- code example for the DAC
- Miscellaneous MicroConverter code example
- code example demonstrating powerdown mode
- code example for changing the core execution speed
- code example for the Time Interval counter
ADuC8XX GetStarted Guide
(6.0) Installed Documentation and Code Directory
C
ODE
).
-- 22 --
D
IRECTORY
www.analog.com/microconverter