Analog Devices ADUC812 Get Started Manual page 14

ADuC8XX GetStarted Guide
(4.0) USB-EA Emulator
4.3 Configuring Keil tools for the USB-EA emulator
Open your project using a recent version of Keil PK51 development software.
From the Keil uVision menu select Flash -> Configure Flash Tools -> Debug
Make the selections as shown on the right half of the screen below, ensuring to select the ADI
Monitor Driver.
Click on Settings at the top right. Select 1-Pin Pod and the COM port assigned to the emulator as
shown below. Use Device Manager to identify the appropriate COM port as describer previously.
Download the latest 8051 tools from these vendors from their website:
www.Keil.com
REV 1.3 -- 14 -- www.analog.com/microconverter