1800 Series Handheld RFID Reader
4)
In the Generic Bluetooth
MACID of host computer.
5)
Enable HyperTerminal on the host computer and configure the variables required for
®
Bluetooth
SPP Master connection.
Command
#@bt_target=0,0015834fbe42
Response (s)
OK
Note: When any changes are made to Bluetooth
®
Bluetooth
connection by "#@bt_reset" command. Refer to
Connection.
6)
On the host computer, a Bluetooth
of the taskbar. Click it.
86
Reference Manual
®
Radio Properties window, select Advanced tab to see the Bluetooth
→ configure the type and MACID of connected device
®
connection information box will pop-up on the lower right
®
type, it is suggested to reset the
®
3.3.2 Reset a