Table of Contents
Advertisement
1800 Series Handheld RFID Reader
9)
In the Bluetooth
Note: When any changes are made to authentication and PIN code on the RFID Reader,
or you want to change to use Bluetooth
connected RFID Reader from the paired device list (called unpairing) first and go
through the whole process to re-establish the connection.
10)
Run the desired application on host computer, such as HyperTerminal.exe if using Bluetooth
SPP or Notepad.exe if using Bluetooth
Once the desired application is configured completely, the status of the RFID Reader listed on
the device list will be showed as "Connected", indicating the WPAN connection is established
successfully.
88
Reference Manual
®
Devices configured window will show you connected Device.
®
HID, it is suggested to remove the
®
HID.
®
Advertisement
Table of Contents
