CipherLab 1800 series Reference Manual page 148

1800 Series Handheld RFID Reader
Time
You can enable this function to display time in seconds with the scale of two digits to the
right of the decimal point if second field is enabled.
Command:
#@dat_tms?\r
Purpose Get Time Format
Response OK,[m]\r (Default m= '1')
[m]: Display time in seconds with two digits after the decimal point.
0 – Disable, 1 – Enable
ERR,[code]\r
#@dat_tms=[m]\r
Purpose Set to Display Time
Request #@dat_tms=[m]\r
[m]: Display time in seconds with two digits after the decimal point.
0 – Disable, 1 – Enable
Response OK\r
ERR,[code]\r
Example:
Command
#@dat_tms?
Response (s)
OK,1
5. 2012-04-12 05:44 59.47 30003430333130303132303030304221
Command
#@dat_tms=0
Response (s)
OK
6. 2012-04-12 05:44 59 30003430333130303132303030304221
136
Reference Manual
→ get the displaying format of seconds
display time in seconds with two digits after the decimal point
↑
→ set to display time in seconds without decimals