CipherLab 1800 series Reference Manual page 161

#@dat_ostrkey=[m]\r
Purpose Set Key Action of Output String, refer to
Response OK\r
ERR,[code]\r
Output String Data
Output strings have a maximum length of 10 characters and can be defined in Hexadecimal or in
ASCII characters. Strings longer than 10 characters will be truncated.
Command:
#@dat_ostrh?\r, #@dat_ostr?\r
Purpose Get Output String
Request #@dat_ostrh?\r Response data will be shown in Hexadecimal value
#@dat_ostr?\r Response data will be shown in character
Response OK,[m]\r
[m]: Data is stored in buffer.
ERR,[code]\r
#@dat_ostr=[m],[n]\r
Purpose Set Output String, refer to
[m]: specify the data format, '0'- in Hexadecimal, '1'- in character
[n]: Data to be stored in buffer
Response OK\r
ERR,[code]\r
#@dat_ostr=1,#@iOSKBD\r
Purpose This command is used to have the on-screen keyboard of iPad/iPhone showing up
when the Bluetooth
Response OK\r
ERR,[code]\r
Note: Specify '00' (hexadecimal) to clear the input data.
Table 6.1
®
connection type is HID.
Chapter 6
Table 6.1
Alternate Mode
149