Table of Contents
Advertisement
Purpose
Get Bluetooth® PIN Code
Response
OK,[m],[n]\r (Default m= '0000', n= '4')
[m]: length of PIN '0' ~ '16', '0' means no PIN
[n]: PIN, 1~16 characters, only exists when [m]!= '0' (m≠0)
ERR,[code]\r
#@bt_pin=[m],[n]\r
Purpose
Set Bluetooth
Response
OK\r
ERR,[code]\r
User-specified PIN
No PIN required
Note: When using Bluetooth
code for authentication. In this case, make sure you have the RFID Reader set to
"No PIN required" or "User-specified PIN" before pairing. While pairing, the host
PIN code will be displayed on the host computer. Have the RFID Reader to input
the matching PIN code for connection. Refer to
®
PIN Code
®
HID, some device driver may not support pre-defined PIN
Chapter 3
Setting Up a WPAN Connection
1.3.2 Bluetooth® Pairing
Mode.
75
Advertisement
Table of Contents
