Table of Contents
Advertisement
1800 Series Handheld RFID Reader
Note: When Bluetooth
random PIN code is supported.
11)
Now the RFID Reader will be listed as shown below.
Select and Remove
Note: When any changes are made to authentication and PIN code on the RFID Reader,
or you want to change RFID Reader to use Bluetooth
remove the connected RFID Reader from the paired device list (called unpairing)
first and go through the whole process to re-establish the connection.
12)
Run the desired application on your computer, such as HyperTerminal.exe if using Bluetooth
SPP or Notepad.exe if using Bluetooth
Once the desired application is configured completely, the status of the RFID Reader listed on
the device list will be showed as "Connected", indicating the WPAN connection is established
successfully via the outgoing COM port if using Bluetooth
Note: Even though the RFID Reader is connected to the host with authentication disabled
(= no PIN code required), the host may still request a PIN code while the
application is opening COM port. A random PIN code is supported so that you can
input a matching PIN code on the RFID Reader. Refer to
Settings.
82
Reference Manual
®
security is enabled without providing a pre-set PIN code, the
®
HID.
®
HID, it is suggested to
®
SPP Slave.
3.1.2 Configure Related
®
Advertisement
Table of Contents
