Table of Contents
Advertisement
1800 Series Handheld RFID Reader
4)
Turn on RFID Reader with correct WPAN settings, such as select Bluetooth
HID, broadcasting enabled, authentication enabled, and PIN code specified, etc if you want to
use a passkey. Select "My device is set up and ready to be found" check box on the "Add
®
Bluetooth
Device Wizard" window.
5)
Click [Next].
6)
Wait for a few seconds for the Wizard to search available devices nearby.
All available devices will appear on the search window. Select the device (e.g. RFID Reader)
that you want to connect.
If the target device does not appear on the list, click [Search Again] to refresh the list. The
RFID Reader might enter power-saving mode during an idling time (=discoverable), and you
can press the <Trigger> to have it active again. It will then stay active for a specified period
of time (2 minutes by default) and wait for the host computer to establish a connection.
78
Reference Manual
®
SPP Slave or
Advertisement
Table of Contents
