CipherLab 1800 series Reference Manual page 102

1800 Series Handheld RFID Reader
Command
#@bt_aclidx=0
Response (s)
OK
Command
#@bt_aclpr=97
Response (s)
OK
Command
#@bt_aclidx=4
Response (s)
OK
Command
#@bt_aclpr=10
Response (s)
OK
Command
#@bt_aclact
Response (s)
OK
7) After the "#@bt_aclact" command is performed, the connection between RFID Reader
and 3610 will disconnect for a while. Once the connection resumes, the interface of
3610 is updated to USB HID.
8) For USB HID via 3610 connection, you can capture the data by running any text
editor, e.g. NotePad on host computer.
9) Once the connection is successful, the scanned data will be transmitted to the
NotePad.
90
Reference Manual
→ enter 3610 type configuration
→ set to 3610 PCAT US
→ enter inter-character delay setting
→ set keyboard inter-character delay time to 10ms
→ activate the settings