CipherLab 1800 series Reference Manual page 107

3. Scan Session Timeout, Scanning Delay, Multi-Tag Counter and EPC filter
parameters have no effect in this mode.
4. If RFID Function=Write Tag Memory, the RFID Reader can not be set to Test
Mode.
Command:
#@rf_scan?\r
Purpose Get Scan Mode
OK,[m]\r (Default m= '6')
Response
[m]: Scan Mode
'6' – Single Mode
'7' – Test Mode
'9' – Multi – Tag Mode, refer to
ERR,[code]\r
#@rf_scan=[m]\r
Purpose Set Scan Mode
Response OK\r
ERR,[code]\r
Chapter 4
4.4 Multi-Tag.
SCANNING UHF RFID Tag
95