SEND DATA
To transmit the data to the host immediately, use the following command "#@sys_memup".
Command:
#@sys_memup\r
Purpose
Upload Memory Data
Response
OK\r
[m]\r
EOT,[n]\r
ERR,[code]\r
CLEAR MEMORY
Even though data has been sent back to the host, the flash memory is still occupied with the
scanned data which can be uploaded repeatedly unless you erase the memory by issuing
"#@sys_memclr" command to clear memory.
Command:
#@sys_memclr\r
Purpose
Clear Memory
Response
OK\r
ERR,[code]\r
//command received
//data string
//End of Transmit. [n] indicates the total data count.
Chapter 1
Understanding RFID Reader
29