Accessory Checklist; Important Safety Instruction - XYZ Printing da Vinci Jr.1.0w User Manual

Product Overview

Accessory Checklist

．Guide tube ．Feeding Path
Cleaning Wire
．Cleaning Brush ． Scraper
Important Safety Instruction for Use of Maintenance Tools
• The maintenance tools provided should be only handled by an adult. Please keep the tools away
from children.
• Store the gear cleaning brush properly. This tool shall only be used to clean the specified parts of the
machine and should not be used for the cleaning of other parts to prevent damaging the machine.
• The scraper is used to remove the object from the print bed when printing has finished. The bed tape
is reusable and it can be replaced when it has worn out.

Important Safety Instruction

• Do not place the printer in humid or dusty environment such as bathrooms and high traffic areas.
• Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or
tumble and it may cause serious injury.
• Please keep the front door closed during printing to avoid injury.
• Do not touch the interior of the printer while printing. As it may be hot and include moving parts.
．Cleaning Wire x 5
． ．Power Adapter
SD Card
．Bed Tape X 3pcs
．USB Wire
．Power Cord ．Bundled filament
da Vinci Jr.1.0
Ver. 1.8 April
A: Filament movement area
B: Feed module
C: Detector
D: Extruder
E: Filament
F: Print bed
G
G: SD card port
(Storage format: FAT32)
H: Control and display panel
I: Front cover
USB Port
Power Connector
Power Switch
．Filament spool axle ring
．Feeding Tube Grip X1
(For replacing and installing the
Feeding Tube Grip, please
watch the tutorial video
on XYZprinting official website)
2016
P 3