Assembly
3
Assembly
Assembling the printer and option
1.
Installing the media guides and tying bands
[1]
[2]
[3]
× 2
Install the two media guides in the positions shown in the figure.
Install one of the accessory tying bands to the position shown in the
figure.
Note
• To release the tying band, simply press its lever.
• This tying band is for fastening the power cable so that it will not interfere
with roll media.
Install the other tying band on the opposite side.
Note
• This tying band is for fastening the Ethernet cable so that it will not interfere
with roll media.
Assembly
5