Setting Up The Printer - MUTOH ValueJet VJ-628 Startup Manual

Setting up the Printer

2 Setting up the Printer
Conduct setup referring to the set-up wizard screens.
The set-up wizard is launched from the accessory software CD.
Turn on the power
[1]
Press!
Important!
Check before turning the power ON.
• Is the media fixing knob locked?
• Is the front cover closed?
Insert the software CD
The accessory software CD has the following functions.
• It displays the procedure for setting up the printer, on the computer screen (Set-up Wizard function).
• It installs the following software and data to the computer (combined installation function).
ValueJet Finder (VJ Finder)
Printer driver
ValueJet Status Monitor (VSM)
Manuals(Printer and software)
[1]
[2]
Carry out set-up by following the instructions on the Set-up Wizard screen.
Turn on the printer's Power button.
Note
• The blue indicator will light up.
• The printer will start to power up.
Sets an IP address for the printer, so that it can communicate with the computer.
Needed for sending data from the computer to the printer. Also used for changing
the print settings and at certain other times.
Monitors the printer's status information, and is able to alter various settings. Also
able to carry out initial ink charging and test printing.
To read, right click the icon of CD-ROM drive, display the contents of CD with [Open],
and open each PDF of [Manual] folder.
Insert the accessory CD into the computer's CD-ROM drive.
Note
• The Set-up Wizard will start up automatically.
• If the set-up wizard does not automatically start, right click the icon of CD-
ROM drive, open the contents of CD with [Open], and double click
VjTotalInst.exe.
Setting up the Printer 11