Installing The Cooling Shroud - Dell poweredge t330 Owner's Manual

Figure 17. Removing and installing the cooling shroud
1. touch point (2)
3. guide pin on the cooling shroud
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in
Related Tasks

Installing the cooling shroud

Installing the cooling shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the
2. Follow the procedure listed in
CAUTION: Do not operate the system with the cover removed for a duration exceeding 5
minutes.
After working inside your system
Safety instructions.
Before working inside your
2. t-handle post on the system board
4. slot (2)
.
system.
63