Table of Contents
Advertisement
Figure 48. Removing the system battery
1.
plastic scribe
3.
securing tabs
3.
Install a new system battery by holding the battery with the "+" sign facing up and slide it under the
securing tabs.
4.
Press the battery into the connector until it snaps into place.
Figure 49. Installing the system battery
1.
positive side of the battery connector
Next steps
1.
Install the cooling shroud.
2.
Follow the procedure listed in
3.
While booting, press F2 to enter System Setup and ensure that the battery is operating properly.
4.
Enter the correct time and date in the System Setup Time and Date fields.
5.
Exit System Setup.
Related Tasks
Removing the cooling shroud
Installing the cooling shroud
After working inside your
2.
positive side of the battery connector
2.
battery connector
system.
119
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
