Table of Contents
Advertisement
Steps
1.
Locate the hard drive slots numbered from four to seven.
2.
Insert the four-slot hard drive blank into the hard drive slot, and push it until the release tabs click
into place.
Next steps
1.
Install the x8 hard drive backplane.
2.
Install all hard drives.
3.
Install the cooling shroud.
4.
Follow the instructions listed in
Related Tasks
Installing a hot swappable hard drive carrier
Installing the hard drive backplane
Installing the cooling shroud
System memory
Your system supports DDR4 ECC unbuffered DIMMs (UDIMMs).
NOTE: MT/s indicates memory module speed in Mega Transfers per second.
Memory bus operating frequency can be 2133 MT/s, 1866 MT/s, or 1600 MT/s depending on the
following factors:
•
System profile selected (for example, Performance Optimized, Custom, or Dense Configuration
Optimized)
•
Maximum supported memory module frequency of the processors
The system contains four memory sockets — two sets of 2–sockets each. Each 2–socket set is organized
into one channel. In each 2-socket set, the first socket release lever is marked white and the second
socket release lever is marked black.
After working inside your
system.
81
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
