Checks After Installation - Panasonic TK7585-SHK Instruction Manual

Installing the Alkaline Ionizer (continued)

Checks after installation

After installing the Alkaline Ionizer, run water through it, check the following, and take the suggested
action if there is any trouble.
Check item
Is water coming out of
the main spout?
Main spout
Is water coming out of the
acidic water spout when
alkaline ion water has passed
through the Alkaline Ionizer?
Acidic water spout
Is any water leaking
from where the bypass
selector is connected?
24
Trouble inspection location and remedial action
Is the water supply hose bent or flattened.
If it is, straighten it out.
Are the acidic water and drain hoses bent or flattened?
If they are, straighten them out.
Have the acidic water and drain hoses been connected
properly.
If not, check their connections to the acidic water
stand.
Does "Reduce flow" appear on the LCD display?
If so, gradually reduce the flow at the faucet until the
display is cleared.
Has the bypass selector been installed securely on
the faucet?
Check again the instructions for "Attaching the
Bypass Selector", and install it securely.
Have the parts inside the bypass selector been
inserted properly?
If not, install them properly.
Are there any cracks at the end of the faucet (in the
insulating cap, for instance)?
Consult a plumber.
Reference page
20
21
22
23
20
21
22
23
36
40
12 – 17
—