Summary of Contents for Panasonic MicroClear TK-CS200
Page 1
TK-CS200 Model No. Thank you for purchasing this Panasonic product. ■ Please read these instructions carefully before using this product, and save this manual for future use. ■ Please carefully read the “Safety Precautions” (P.EN3-EN4) of this manual before use.
( Doing so may cause malfunction.) z Do not disassemble, repair or remodel the unit. ( Doing so may cause malfunction.) → Please contact a dealer or subordinate service station of Panasonic for inspection or maintenance. TK-CS200_01_EN.indd TK-CS200_01_EN.indd 2022/12/15 2022/12/15...
Safety Precautions Please make sure to follow these instructions In order to prevent accidents to people or damage to property, always follow the instructions below. The following is an explanation of danger and damage caused due to incorrect usage according to severity. WARNING Indicates serious injury or death.
Page 4
Safety Precautions (continued) Please make sure to follow these instructions CAUTION When using purified water z Do not use purified water for the care of fish, etc. ( The environment may change as a result, and the fish, etc. may die.) z At the beginning of daily use, run water about 1.5 liters (about 15 seconds) before using.
Names of the Parts and Check Installation 1 the supplied accessories Overall figure Main unit Faucet Cover Outlet pipe Main spout Hose Bypass selector Items in the package If any are missing, contact your dealer. Main unit Outlet pipe Bypass selector ...
Checking the faucet Installation 2 Water faucet which cannot install the Water Purifier Faucet without a metal lip end Faucet with an end of 10 mm or less 10 mm or less Plastic or other material Shower nozzle Faucet with sensor Note Faucet with a flaring end Water faucet which can attach the Water...
Attaching the bypass selector Installation 3 Keep all parts that are not used during installation, as they may be needed later if the unit is moved or the faucet is changed. Outside-screwed faucet Inside-screwed faucet y Water faucet which can attach the bypass y Water faucet which can attach the bypass selector without an accessory.
Page 8
Attaching the bypass selector Installation 3 (continued) Faucet without an aerator y Water faucet which can attach the bypass selector with accessory. ① 11 mm or more Bulge ① ① ② 13 mm or more, less than 24 mm ② ②...
I nstalling the Water Purifier Installation 4 After completing the preparations, connect the hose. ① Remove the hose fastening nut from the bypass selector, and pass the hose through the nut. ② Insert the hose into the bypass selector as far as it will go. ③...
Checks after installation Installation 5 Run purified water for about 5 minutes to expel the air inside the main unit. ① Set the bypass selector to “ ”. ② Turn on the water faucet to let the water flow. Note Purified water may contain some black powder (activated carbon).
Checks after installation Installation 5 (continued) Reference Check item Trouble inspection location and remedial action page Has the outlet pipe been attached securely to Is there any water leaking the main unit? from where the outlet pipe → Insert it securely as far as it will go. is connected? Is the gasket installed on the outlet pipe or is it twisted?
How to Use (continued) Open the faucet. At the beginning of daily use, run water about 1.5 liters (about 15 seconds) before using. (P. EN4) Tap water Purified water After use, close the faucet. Water may come out slightly from the main spout even after the water flow is stopped. It is not a malfunction.
Page 13
Maintenance (continued) Bypass selector mounting part Remove the bypass selector, then Water intake rinse the filter and water intake. Using a The water flow may decrease when toothbrush or similar tools the filter in the bypass selector connection area becomes clogged with impurities.
Page 14
Replacing the Cartridge When the service life of the cartridge is to be expired or the Replacement cartridge purified water ability is reduced, please replace the cartridge Model No: TK-CS200C with a new one. (P. EN19) Cartridge replacement standard There are 4 kinds of change standards. If 1 of the following conditions is met, please replace the cartridge.
Replacing the Cartridge (continued) Attach the cover. Open the faucet, and run purified water through the ① Tighten the cover. ● ① Water Purifier. (for about 5 minutes) y Until there is no more gap between cover and case < OK > <...
When Moving the Water Purifier Remove water from the main unit with the following steps before moving the product. Stand the main unit while moving. After removing the water, a small amount of water may remain, so put the main unit in a bag, etc. Disconnect the hose.
Q&A Question Answer What is the part number of the cartridge for TK-CS200C (P. EN19) replacement? Can I use underground Only the water that has passed a test for drinking can be used. water or well water? Water with a temperature of less than 35 °C can be used. Up to what (P.
Before Requesting a Repair Service If the problem is not solved after the following contents are checked, please contact a dealer or subordinate service station of Panasonic for handling. Problem Check point Faucet and connection parts of bypass selector, See P. EN10-EN11.
Optional Accessories Obtain all optional accessories from your dealer. For details on how they are used, refer to the accompanying instructions. Consumables For use with large faucet Replacement cartridge Large-diameter Faucet Fitting Model No: TK-CS200C (inside diameter 32.5 mm) Model No : WTK7205X7378 y For faucets whose end diameter is 24 - 32 mm Mark position of the manufacturing number The manufacturing number is marked on this location.