Check After Installation; Installation 3 Inspecting The Quick-Connect Valve - Panasonic TK-CB430 Operating Instructions Manual

Check after installation

Installation 2
To exhaust the air in the main unit,
the purified water shall be drained
for 10 minutes or longer.
To use the Water Purifier (P. EN10)
❶ Lower the lever (water is discharged)
❷ Raise the lever (water stops flowing)
If the air in the main unit is not completely exhausted, the water flow
O
will not be smooth.
If there are still bubbles remaining in the purified water or it has an unpleasant smell or taste even after
O
flushing for 10 minutes, please flush for an additional 10 minutes.
Inspecting the Quick-connect valve
Installation 3
❶ Close the Quick-connect valve
(Raise the water stop lever)
If the water stops flowing from the outlet pipe, the Quick-connect valve is operating correctly.
O
❷ Please open the Quick-connect valve to use.
(Lower the water stop lever)
For how to adjust Quick-connect valve, see "Adjustment of water pressure"
O
(P. EN10).
If other than above, the Quick-connect valve may have malfunctions, so
O
please contact a dealer or subordinate service station of panasonic.
❷
❶
Water stop lever
❶
❷
EN9