Panasonic TK7585-SHK Instruction Manual page 46

For Your Operating Convenience (continued)/
Measuring the water output volume
Setting the difference in height
between the main spout and acidic
water spout
It is recommended that this height be set in
order to improve the accuracy of the water
output display.
Before proceeding with the setting, check
the difference in height between the main
spout and acidic water spout without fail.
Use the Alkaline Ionizer with a height
difference between the two spouts of 10 to
50 cm.
Control panel/
Main spout
Height
difference
Acidic water spout
When
Note
previous screen will not be restored even when the button is pressed.
Once the settings have been set, they will be stored in the memory until other settings are established
(until they are changed).
Displays on the screens indicated by the asterisks will be in Chinese even if the English display mode is
established.
46
LCD display
is pressed in steps 2 to 6, the previous screen is restored. After the settings are completed, the
(continued)
Operation
1
Turn off the faucet, and press
on the control panel for
1 second.
2
Press .
3
Press
" ".
4
Press .
To perform "Correcting the water output
display", proceed to step 5 on page 48.
5
Press .
6
Press
height difference setting.
Set a value in accordance with the height
difference which you measured.
7
Press .
<The setting is finished>
8
Press
9
Press .
, and select the
, and select the
, and select " ".