Monitoring The Water Flow - Panasonic TK7585-SHK Instruction Manual

For Your Operating Convenience (continued)/

Monitoring the water flow/

While water is running through the Alkaline Ionizer, the water flow (total flow of water coming out of the
main spout, acidic water spout and drain outlet per minute) is displayed and can be monitored. (Flow
display)
Press
appears on the LCD display.
Each time the button is pressed, the LCD display changes.
No figure for the flow will be displayed when the supply of water has
been turned off or when the flow is under about 1.0 liter/minute.
When the water flow cannot be displayed
When the flow cannot be displayed (such as when the water pressure is too low), it can be monitored
on the "Check flow" display.
1
Turn off the faucet, and press
repeatedly until the buzzer beeps four times
(about 3 seconds).
When the button is pressed again for about
3 seconds, the display returns to the previous
screen. The water quality is automatically
returned to the "Alkaline" setting used last.
2
Open the faucet.
When the faucet is turned off, the display returns to the previous screen.
50
repeatedly until "Flow"
Example/
Flow display
Check flow
display