Table of Contents
Advertisement
3
Press
(for about 3 seconds).
The "Reset completed" screen appears,
and about 3 seconds later the "Cartridge
life" display appears.
Refer to the displays on the right, and
check whether the balance cartridge
life has been reset correctly.
4
Open the faucet, and
run water through the
Alkaline Ionizer (for about 3 or
4 minutes).
When water is run through the Alkaline
Ionizer, "Preparation time" blinks for about
20 seconds on the LCD display.
While water is running through the Alkaline
Ionizer, check that water is not leaking from
the area where the cartridge was installed
and that water is coming out of the drain
outlet.
Reset completed screen Cartridge life display
Drain outlet
Continued on next page
LCD display
65
Hide quick links:
Advertisement
Table of Contents
