Trip Meters; Trip Meter Reset - Triumph Tiger XR Owner's Handbook Manual

General Information

Trip Meters

2
3
1. Trip meter display
2. Trip meter 1 display
3. Trip meter 2 display
Press and release the SET button on the
left hand switch housing until the
desired trip meter is visible.
Note:
• The journey time,
consumption and average speed
displays are not
Tiger XR und Tiger XC models.
Press and release the SCROLL button on
the left hand switch housing. The display
will cycle through in the following order:
• Journey distance
• Journey time
• Average fuel consumption
• Average speed.
38
Each display provides the following
information:
Journey Distance
The total journey distance travelled
since the trip meter was last reset to
zero.
Journey Time
The total time elapsed since the trip
meter was last reset to zero.
Average Fuel Consumption
An indication of the average fuel
consumption since the trip meter was
last reset to zero. After being reset the
1
display
0.1 miles/km has been covered.
Average Speed
The average speed is calculated from
when the trip computer was last reset
to zero. After being reset the display will
show dashes until one mile/km has been
covered.

Trip Meter Reset

average fuel
To reset either of the trip meters, select
and display the trip meter to be zeroed
available on
then press and hold the SET button for
two seconds. After two seconds, all
items within the selected trip meter will
reset to zero.
will show dashes until