Yamaha F6AMH Service Manual page 194

MANUAL STARTER
2. Install:
Starter wire 2


Installing steps:
(1)Insert the starter wire 2 through the
wire holes and then tie a knot on the
end of the wire.
(2)Place the starter wire at the cutaway of
the sheave drum.
3. Install:
Sheave drum 3


NOTE:
Position the inner end of the starter spring
on the retainer post of sheave drum.
4. Install:
Drive spring 4


Drive plate 5


Screw 6


Installing steps:
(1)Install drive spring 4 to drive plate 5.
(2)Pass the tip of drive spring 4 through
the coil portion of return spring 7, and
install drive plate 5 to the sheave
drum.
(3)Install screw 6.
5-7