Contents
Preparation
safety .........................................
5
9
part ...........................................
11
Getting
started
Projection methods, Projector
position, Projection distances
............................... 18
compatible with YPBPR (CsCR)
signals,
Basic operation
Useful functions
settings ....................................
31
Adjustments
and settings
Menu screens, Menu operation
guide, Returning a setting to the
factory default
BRIGHT, COLOR, TINT,
SHARPNESS, COLOR TEMP.,
AI, ADVANCE MENU,
MEMORY SAVE, MEMORY LOAD,
TV-SYSTEM, SIGNAL MODE,
Horizontal position, Vertical position,
DOT CLOCK, CLOCK PHASE,
ASPECT,AUTO
SETUP
.......................... 42
OSD, Noise Reduction (NR),
PC PRIORITY, BACK COLOR,
EDID, FRONT/REAR,
DESK/CEILING,
FAN CONTROL,
LAMP POWER, LAMP RUNTIME
Care and maintenance
Others
Appendix ....................................
54
dimensions calculation methods
................................ 57
Precautions with regard to safety
WARNING
If a problem occurs (such as no image or no sound) or if you notice
smoke or a strange smell coming from the projector, turn off the power
and disconnect the power cord from the wall outlet.
• Do not continue to use the projector in such cases, otherwise fire or
electric shocks could result.
• Check that no more smoke is coming out, and then contact an Authorized
Service Center for repairs.
• Do not attempt to repair the projector yourself, as this can be dangerous.
Do not install this projector
in a place which is not strong enough to
take the full weight of the projector.
• If the installation location is not strong enough, it may fall down or tip over,
and severe injury or damage could result.
Installation
work (such as ceiling suspension) should only be carried
out by a qualified
technician.
• If installation is not carried out correctly, there is the danger that injury or
electric shocks may occur.
If foreign
objects or water get inside the projector,
or if the projector
is
dropped
or the cabinet is broken, turn off the power and disconnect
the
power cord from the wall outlet.
• Continued use of the projector in this condition may result in fire or electric
shocks.
• Contact an Authorized Service Center for repairs.
Do not overload the wall outlet.
• If the power supply is overloaded (for example, by using too many
adapters), overheating may occur and fire may result.
Do not remove the cover or modify it in any way.
• High voltages which can cause fire or electric shocks are present inside
the projector.
• For any inspection, adjustment and repair work, please contact an
Authorized Service Center.
Clean the power cord plug regularly
to prevent it from becoming
covered in dust.
• If dust builds up on the power cord plug, the resulting humidity can
damage the insulation, which could result in fire. Pull the power cord out
from the wall outlet and wipe it with a dry cloth.
• If not using the projector for an extended period of time, pull the mains
plug out from the wall outlet.
4-ENGL/SH
ENGL/SH-5