Periodic Maintenance - HYOSUNG GT250 REi Owner's Manual

PERIODIC MAINTENANCE

The chart indicates the intervals between
periodic service in kilometers.
At the end of each interval, be sure to
inspect, check, lubricate and service as
instructed.
If your motorcycle is used under high
stress conditions such as continuous full
throttle operation, or is operated in a dusty
climate, certain services should be
performed more often to ensure reliability of
the machine as explained in the
maintenance section.
Your Hyosung dealer can provide you
with further guide lines.
Steering components, suspensions and
require very special and careful servicing.
For maximum safety we suggest that you
have these items inspected and serviced by
your authorized Hyosung dealer or a
qualified service mechanic.
WARNING
Improper maintenance or failure to
perform recommended maintenance
increases the chance of an accident or
motorcycle damage.
Always follow the inspection and
maintenance recommendations and
schedules in this owner's manual.
Ask your Hyosung dealer or a qualified
mechanic to do the maintenance items
marked with a pentagram(★ ★ ).
You may perform the unmarked
maintenance items by referring to the
instructions in this section, if you have
mechanical experience.
If you are not sure how to do any of the
jobs, have your Hyosung dealer or a
qualified mechanic do them.
WARNING
Running the engine indoors or in a
garage can be hazardous.
Exhaust gas contains carbon monoxide,
a gas that is colorless and odorless and
can cause death or severe injury.
Only run the engine outdoors where
there is fresh air.
Using poor quality replacement parts
can cause your motorcycle to wear
more quickly and may shorten its useful
life.
Use only genuine Hyosung replacement
parts or their equivalent.
N O T E
The MAINTENANCE CHART specifies
the minimun
maintenance. If you use your motorcycle
under severe conditions, perform
maintenance more often than shown in
the chart. If you have any questions
regarding maintenance intervals, consult
your Hyosung dealer or a qualified
mechanic.
60
CAUTION
requirements for