Instrument Panel - HYOSUNG GT250 REi Owner's Manual

INSTRUMENT PANEL

❷ ❸ ❹
❶
❿
❷ ❸ ❹
❶
❿
WARNING
Operating the display while riding can
be hazardous. Removing a hand from
the handlebars can reduce your ability
to control the motorcycle.
Always keep both hands on the
handlebars while riding.
CAUTION
When the ignition switch is turned to the
"ON" position, the display of
speedometer will come on.
❷
❺
❽
❾
❻ ❼
❷
❺
❽
❾
❻ ❼
To adjust the light of speedometer
display, push the switch ⑧ ⑧ (in the
normal mode) for 0.6 ~ 1 seconds while
you want to change.
[Light of speedometer display]
①
TACHOMETER
The tachometer indicates the engine
speed in revolutions per minutes (rpm).
Revving the engine into the red zone of
the tachometer can cause severe engine
damage. Never allow the engine to rev
into the red zone of the tachometer in
any gear.
② ②
TURN SIGNAL INDICATOR LAMP
When the turn signals are being operated
either to the right or to the left, the indicator
will flash at the same time.
③ ③
HIGH BEAM INDICATOR LAMP
The high beam indicator lamp will come
on when the head lamp high beam is
turned on.
④ ④
NEUTRAL INDICATOR LAMP
The neutral indicator lamp will come on
when the transmission is in neutral.
The lamp will go out when you shift into
any gear other than neutral.
29
CAUTION
100%
↓ ↓
75%
↓ ↓
50%
↓ ↓
25%
CAUTION