HYOSUNG GT250 REi Owner's Manual page 33

⑧ ⑧
SELECT SWITCH
Use this switch to adjust the following :
In the normal mode
●
Push it for
To adjust the light of
0.6 ~ 1
speedometer display
seconds
(100% → 75% → 50% → 25% → 100%)
Normal mode
2 seconds
In the clock reset mode
●
Push it for
0.6 ~ 1
Increase the minutes of clock
seconds
Clock reset mode
2 seconds
⑨ ⑨
RESET SWITCH
Use this switch to adjust the following :
In the normal mode
●
Push it for
0.6 ~ 1
Odometer
seconds
Trip meter
Reset the trip meter to zero,
2 seconds while the display indicates trip
meter
In the clock reset mode
●
Push it for
0.6 ~ 1
Increase the hour of clock
seconds
Adjustment
→ Clock reset mode
Adjustment
→ Normal mode
Adjustment
→ Trip meter A
→ Odometer
B
or
A B
Adjustment
⑩ ⑩
SPEEDOMETER
The speedometer indicates the road
speed in kilometers or miles per hour.
To change the speedometer display :
1. Turn the ignition switch to the "ON"
position.
→
2. Pushing the switch ⑧ (in the normal
mode), turn the igniton switch to the
"OFF" position and turn to the "ON"
position again.
3. Push the switch ⑧ (in the normal mode)
for 5 seconds continually until the
speedometer display change.
Obey the speed limit and traffic
regulation at all times.
32
WARNING