HYOSUNG GT250 REi Owner's Manual page 69

4. Clean the air cleaner element for the
following :
1) When the air cleaner element clean
with the air gun, necessarily blow at
the inside by compressed air.
2) Carefully examine the air cleaner
element for tears during cleaning.
Replace it with a new one if it is torn.
3) Assemble the element completely or
damage severely the engine.
4) Be careful not to allow water to go
inside the air cleaner element.
CAUTION
Before and during the cleaning
operation, inspect the element for tears.
A torn element must be replaced.
Be sure position the element snugly and
correctly, so that no incoming air will
bypass it.
Remember, rapid wear of piston rings
and cylinder bore is often caused by a
defective or poorly fitted element.
CAUTION
● ● When the assembly of air cleaner
element is not completely done,
dusts can go inside and damage
severely engine.
● ● Be careful not to allow water to go
into the element while washing.
More frequent servicing may be
performed on motorcycles that are used
under severe conditions, also clean the
air cleaner element when replacing the
oil to prevent damage of the engine.
WARNING
Operating the engine without the air
cleaner element in place can be
hazardous.
Never run the engine without the air
cleaner element in place.
68
CAUTION