HYOSUNG GT250 REi Owner's Manual page 86

⊙ ⊙ HEAD LAMP'S BULB
REPLACEMENT
(
1. Remove the head lamp cowling ①.
2. Remove the three screws ② (right, left
and bottom) and the head lamp
assembly.
3. Disconnect the head lamp coupler.
4. Remove the dust cover ③ and socket
spring ④.
5. After removing the bulb at the socket,
replace the new bulb.
6. To install the head lamp, reverse the
above sequence.
& )
❶
❷
❹ ❸
⊙ ⊙ TURN SIGNAL LAMP'S BULB
REPLACEMENT
1. Remove the lens by removing the screw.
2. Pushing in the bulb, turn it to the counter-
clockwise, and pull it out.
3. After stick in the new bulb, assemble the
lens.
Overtightening the screw may cause the
lens to crack.
85
CAUTION