LAG
Name
Type
Link State
Active Member
Standby Member
Modify
4.4.3 LAG Port Setting
This page allows setting configuration for per LAG. The LAG Port Setting screens in
The page includes the following fields:
Object
LAG Selet
Enable
Speed
The LAG for the settings contained in the same row.
Display the current name
Display the current typ
Display the link state
Display the active member
Display the standby member
Click
to modify LAG configuraiton.
Figure 4-4-6 LAG Port Setting Information Page Screenshot
Description
Select LAG number for this drop down list.
Indicates the LAGt state operation. Possible state are:
Enabled - Start up the LAG manually.
Disabled - Shutdown the LAG manually.
Select any available link speed for the given switch port. Draw the menu bar to
select the mode.
Auto - Setup Auto negotiation.
Auto-10M - Setup 10M Auto negotiation.
Auto-100M - Setup 100M Auto negotiation.
Auto-1000M - Setup 1000M Auto negotiation.
Auto-10/100M - Setup 10/100M Auto negotiation.
Figure 4-4-6
92
User's Manual of WGSW-28040
&
Figure 4-4-7
appear.