Rate Limit - Planet Networking & Communication wgsw-28040 User Manual

The page includes the following fields:
Object
 Port
 Forwarded
Source MAC Failures
 Dest MAC Failures
 SIP Validation Failures
 DIP Validation Failures
 IP-MAC Mismatch
Failures
Buttons
: Click to clear the statistics.
: Click to refresh the statistics.

4.9.8.5 Rate Limit

The ARP Rate Limit Setting and Config screens in
The page includes the following fields:
Object
 Port
 State
 Rate Limit (pps)
Description
The switch port number of the logical port.
Display the current forwarded
Display the current source MAC failures
Display the current source MAC failures
Display the current SIP Validation failures
Display the current DIP Validation failures
Display the current IP-MAC mismatch dailures
Figure 4-9-57
Figure 4-9-57 ARP Rate Limit Setting Page Screenshot
Description
Select port for this drop down list.
Set default or user-define.
Configure the rate limit for the port policer. The default value is "unlimited".
& Figure 4-9-58 appear.
237
User's Manual of WGSW-28040