The page includes the following fields:
Object
LAG
Name
Type
Link State
Active Member
Standby Member
Modify
4.4.3 LAG Port Setting
This page allows setting configuration for each LAG. The LAG Port Setting screens in
The page includes the following fields:
Object
LAG Select
Enable
Speed
Description
The LAG for the settings contained in the same row
Display the current name
Display the current type
Display the link state
Display the active member
Display the standby member
Click
to modify LAG configuration
Figure 4-4-6 LAG Port Setting Information Page Screenshot
Description
Select LAG number from this drop-down list.
Indicates the LAG state operation. Possible states are:
Enabled - Start up the LAG manually.
Disabled – Shut down the LAG manually.
Select any available link speed for the given switch port. Draw the menu bar to
select the mode.
Auto – Set up Auto negotiation.
Auto-10M – Set up 10M Auto negotiation.
Auto-100M – Set up 100M Auto negotiation.
Figure 4-4-6
91
User's Manual of IGS-801M
&
Figure 4-4-7
appear.