Installing The Sfp Transceiver - Planet Networking & Communication wgsw-28040 User Manual

Step6:
Proceeds with Steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply power to
the Managed Switch.

2.2.3 Installing the SFP transceiver

The sections describe how to insert an SFP transceiver into an SFP slot.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP port
without having to power down the Managed Switch, as the
Approved PLANET SFP Transceivers

PLANET Managed Switch supports both Single mode and Multi-mode SFP transceiver. The following list of approved PLANET
SFP transceivers is correct at the time of publication:
Gigabit SFP Transceiver Modules
MGB-GT

MGB-SX

MGB-LX

MGB-L50

MGB-L70

MGB-L120

MGB-LA10

MGB-LA20

MGB-LB20

MGB-LA40

MGB-LB40

Fast Ethernet SFP Transceiver Modules
MFB-FX

MFB-F20

Figure 2-1-7 Plug in the SFP transceiver
SFP-Port 1000Base-T Module
SFP-Port 1000Base-SX mini-GBIC module
SFP-Port 1000Base-LX mini-GBIC module
SFP-Port 1000Base-LX mini-GBIC module -50KM
SFP-Port 1000Base-LX mini-GBIC module -70KM
SFP-Port 1000Base-LX mini-GBIC module -120KM
SFP-Port 1000Base-LX (WDM,TX:1310nm) -10KM
SFP-Port 1000Base-LX (WDM,TX:1310nm) -20KM
SFP-Port 1000Base-LX (WDM,TX:1550nm) -20KM
SFP-Port 1000Base-LX (WDM,TX:1310nm) -40KM
SFP-Port 1000Base-LX (WDM,TX:1550nm) -40KM
SFP-Port 100Base-FX Transceiver -2KM
SFP-Port 100Base-FX Transceiver -20KM
Figure 2-1-7 shows.
23
User's Manual of WGSW-28040