Snmpv3 Notification Recipients - Planet Networking & Communication wgsw-28040 User Manual

Object
 Server Address
 SNMP Version
 Notify Type
 Community Name
 UDP Port
 Time Out
 Retries
 Action

4.2.7.88 SNMPv3 Notification Recipients

Configure SNMPv3 notification recipients on this page. The SNMPv1, 2 Notification Recipients screens in
Figure 4-2-34 appear.
The page includes the following fields:
Object
 Server Address
 Notify Type
 User Name
 UDP Port
 Time Out
 Retries
Description
Display the current server address.
Display the current SNMP version.
Display the current notify type.
Display the current community name.
Display the current UDP port.
Display the current time out.
Display the current retry times.
: Delete the SNMPv1, 2 host entry.
Figure 4-2-33 SNMPv3 Notification Recipients Page Screenshot
Description
Indicates the SNMP trap destination address. It allows a valid IP address in
dotted decimal notation ('x.y.z.w'). It can also represent a legally valid IPv4
address. For example, '::192.1.2.34'.
Set the notify type in traps or informs.
Indicates the user string when send SNMP trap packet.
Indicates the SNMP trap destination port. SNMP Agent will send SNMP message
via this port, the port range is 1~65535.
Indicates the SNMP trap inform timeout. The allowed range is 1 to 300.
Indicates the SNMP trap inform retry times. The allowed range is 1 to 255.
64
User's Manual of WGSW-28040
Figure 4-2-33 &