How To Use This Manual; Product Features - Planet Networking & Communication wgsw-28040 User Manual

Intelligent SFP Diagnosis Mechanism
The WGSW-28040 supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily
monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current and
transceiver supply voltage.

1.3 How to Use This Manual

This User Manual is structured as follows:
Section 2, INSTALLATION
The section explains the functions of the Switch and how to physically install the Managed Switch.
Section 3, SWITCH MANAGEMENT
The section contains the information about the software function of the Managed Switch.
Section 4, WEB CONFIGURATION
The section explains how to manage the Managed Switch by Web interface.
Section 5, SWITCH OPERATION
The chapter explains how to does the switch operation of the Managed Switch.
Section 6, TROUBSHOOTING
The chapter explains how to trouble shooting of the Managed Switch.
Appendix A
The section contains cable information of the Managed Switch.

1.4 Product Features

Physical Ports
■ 28-Port 10/100/1000Base-T Gigabit RJ45 copper
■ 4 100/1000Base-X mini-GBIC/SFP slots, shared with Port-25 to Port-28
■ RJ45 console interface for switch basic management and setup
Layer 2 Features
■ Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
■ High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous
packets to optimize the network bandwidth
■ Supports VLAN
- IEEE 802.1Q tagged VLAN
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Protocol VLAN
- Voice VLAN
- Private VLAN
12
User's Manual of WGSW-28040