Planet Networking & Communication wgsw-28040 User Manual page 31

If there are two LAN cards or above in the same administrator PC, choose a different LAN card
by using the "Select Adapter" tool.
Press "Refresh" button for the currently connected devices in the discovery list as the screen shows below:
3.
1. This utility shows all necessary information from the devices, such as MAC Address, Device Name, firmware version and
Device IP Subnet address. It can also assign new password, IP Subnet address and description for the devices.
After setup is completed, press "Update Device", "Update Multi" or "Update All" button to take effect. The meaning of
2.
the 3 buttons above are shown below:

Update Device: use current setting on one single device.

Update Multi: use current setting on choose multi-devices.

Update All: use current setting on whole devices in the list.
The same functions mentioned above also can be found in "Option" tools bar.
To click the "Control Packet Force Broadcast" function, it allows you to assign a new setting value to the Web Smart
3.
Switch under a different IP subnet address.
Press "Connect to Device" button and the Web login screen appears in
4.
Press "Exit" button to shut down the Planet Smart Discovery Utility.
5.
Figure 3-1-7: Planet Smart Discovery Utility Screen
Figure 3-1-4.
31
User's Manual of WGSW-28040