Vlan Setting Example; Two Separate 802.1Q Vlans - Planet Networking & Communication wgsw-28040 User Manual

4.5.14 VLAN setting example:

- Separate VLANs
- 802.1Q VLAN Trunk

4.5.14.1 Two separate 802.1Q VLANs

The diagram shows how the Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and
VLAN Group 3 are separated VLANs. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the
same VLAN members. The screen in
Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario described as follows:
Untagged packet entering VLAN 2

Figure 4-5-20 appears and
Figure 4-5-20 Two Separate VLAN Diagrams
VID Untagged Members
1 Port-7~Port-8
2 Port-1,Port-2
3 Port-4,Port-5
Table 4-5-2 VLAN and Port Configuration
119
User's Manual of WGSW-28040
Table 4-5-2 describes the port configuration of the Managed
Tagged Members
N/A
Port-3
Port-6