Rate Limit - Planet Networking & Communication wgsw-28040 User Manual

The page includes the following fields:
Object
 Database Type
 File Name
 Remote Server
 Write Delay
 Timeout

4.9.7.7 Rate Limit

After enabling DHCP snooping, the switch will monitor all the DHCP messages and implement software transmission. The
DHCP Rate Limit Setting and Config screens in
The page includes the following fields:
Object
 Port
 State
 Rate Limit (pps)
Buttons
: Click to apply changes.
Description
Display the current database type.
Display the current file name.
Display the current remote server.
Display the current write delay.
Display the current timeout.
Figure 4-9-42
Figure 4-9-42 DHCP Rate Limit Setting Page Screenshot
Description
Select port for this drop down list.
Set default or user-define.
Configure the rate limit for the port policer. The default value is "unlimited". Valid
values are in the range 1 to 300.
& Figure 4-9-43 appear.
228
User's Manual of WGSW-28040