Planet Networking & Communication wgsw-28040 User Manual page 111

separate VLAN for each major protocol running on your network. Do not add port members at this time.
Create a protocol group for each of the protocols you want to assign to a VLAN using the Protocol VLAN Configuration
2.
page.
3. Then map the protocol for each interface to the appropriate VLAN using the Protocol VLAN Port Configuration page.
This Page allows for configures protocol-based VLAN Group Setting. The portocol-based VLAN screens in
Figure 4-5-10 appear.
The page includes the following fields:
Object
 Group ID
 Frame Type
 Protocol Value
(0x0600-0xFFFE)
Buttons
: Click to apply changes.
Figure 4-5-9 Add Protocol VLAN Group Page Screenshot
Description
Protocol Group ID assigned to the Special Protocol VLAN Group.
Frame Type can have one of the following values:
 Ethernet II
IEEE802.3_LLC_Other

RFC_1042

Note:
On changing the Frame type field, valid value of the following text field will
vary depending on the new frame type you selected.
Valid value that can be entered in this text field depends on the option selected
from the the preceding Frame Type selection menu.
Valid values for frame type ranges from 0x0600-0xfffe
Figure 4-5-10 Protocol VLAN Group State Page Screenshot
111
User's Manual of WGSW-28040
Figure 4-5-9 &