Hints And Tips; Technical Problems - Sandstrom SDW60GW13 Instruction Manual

Hints and Tips

• Repairs should only be carried out by a qualified technician in strict accordance with current local and
national safety regulations. Unauthorised or incorrect repairs could cause personal injury or damage to
the unit.
• Before calling for service, please refer to the section Hints and Tips to solve some general problems by
yourself.

Technical Problems

Problem
The dishwasher does not
start.
Error code "E1" displayed. Long inlet time.
Error code "E4" displayed. • Overflow.
Error code "E8" displayed. Failure of orientation of
Error code "E9" displayed. Button has been held down
The drain pump is not
working properly.
Problem
Detergent residue is left
in the dispenser at the
end of the programme.
The detergent dispenser
lid cannot be closed
properly.
32
Technical Problems
Possible Causes
The door is not properly
closed.
The unit is not connected to
the mains socket.
The unit is not switched on.
• Leakage in the dishwasher.
distributary valve.
for more than 30 seconds.
The anti-flooding system
has operated.
General Problems
Possible Causes
The detergent dispenser
was still damp when
detergent was added.
Clogged detergent residue
is blocking the catch.
Remedy
Close the door firmly.
Connect the mains plug to the
mains socket.
Press the On/Off button and
select a programme.
• Faucet is not open.
• Water intake is restricted.
• Water pressure is too low.
• Disconnect from the mains socket.
• Call a qualified service agent.
• Open circuit or break of
distributary valve.
• Call a qualified service agent.
• Wipe the control panel.
• If problem persists, call a qualified
service agent.
• Disconnect from the mains
socket.
• Disconnect the water inlet.
• Call a qualified service agent.
Remedy
Make sure the dispenser is dry
before adding detergent.
Clean the catch.