Hints And Tips - Sandstrom SDW60W14N Installation Instructions Manual

Hints and Tips

• Repairs should only be carried out by a qualified technician in strict accordance with current local and
national safety regulations. Unauthorised or incorrect repairs could cause personal injury or damage to
GB the unit.
• Before calling for service, please refer to the section Hints and Tips to solve some general problems by
yourself.
Technical Problems
Problem
The dishwasher does
not start.
Error code "E1"
displayed.
Error code "E4"
displayed.
Error code "E8"
displayed.
Error code "EC"
displayed.
The drain pump is
not working properly.
Problem
Detergent residue is left in
the dispenser at the end of
the programme.
The detergent dispenser lid
cannot be closed properly.
46
Technical Problems
Possible Causes
The door is not properly closed. Close the door firmly.
The unit is not connected to
the mains socket.
The unit is not switched on.
Long inlet time.
• Overflow.
• Leakage in the dishwasher.
Failure of orientation of
distributary valve.
• Fault of PCB data transmission.
• PCB failure.
The anti-flooding system has
operated.
General Problems
Possible Causes
The detergent dispenser was
still damp when detergent
was added.
Clogged detergent residue is
blocking the catch.
Remedy
Connect the mains plug to the
mains socket.
Press the On/Off button and
select a programme.
• Faucet is not open.
• Water intake is restricted.
• Water pressure is too low.
• Disconnect from the mains socket.
• Call a qualified service agent.
• Open circuit or break of distributary
valve.
• Call a qualified service agent.
• Disconnect from the mains socket.
• Disconnect the water inlet.
• Call a qualified technician.
Remedy
Make sure the dispenser is dry
before adding detergent.
Clean the catch.