Maintenance After a Prolonged Period of Non-Operation
If you are not going to use the unit for a prolonged period of time, you are advised to:
1. Disconnect the dishwasher from the mains socket.
2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch any
GB
residual water in the pipes.
3. Slightly open the door to prevent unpleasant smells building up in the compartment.
4. Ensure the washing compartment of the dishwasher is clean.
Hints and Tips
• Repairs should only be carried out by a qualified technician in strict accordance with current local
and national safety regulations. Unauthorised or incorrect repairs could cause personal injury or
damage to the unit.
• Before calling for service, please refer to the section Hints and Tips to solve some general
problems by yourself.
Technical Problems
Problem
The dishwasher does not start.
Error code "E1" displayed.
Error code "E4" displayed.
Error code "E8" displayed.
Error code "EC" displayed.
The drain pump is not working
properly.
44
Technical Problems
Possible Causes
The door is not properly closed.
The unit is not connected to the
mains socket.
The unit is not switched on.
Longer inlet time.
• Overflow.
• Leakage in the dishwasher.
Failure of orientation of
distributary valve.
• Fault of PCB data transmission.
• PCB failure.
The anti-flooding system has
operated.
Remedy
Close the door firmly.
Connect the mains plug to the
mains socket.
On/Off button and
Press the
select a programme.
• Fauces is not open.
• Water intake is restricted.
• Water pressure is too low.
• Disconnect from the mains
socket.
• Call a qualified service agent.
• Open circuit or break of
distributary valve.
• Call a qualified service agent.
• Disconnect from the mains
socket.
• Disconnect the water inlet.
• Call a qualified technician.