Starting A Wash Cycle - Sandstrom SDW60GW13 Instruction Manual

• Express function is available only for intensive, normal, economy, or glass washing cycle.
• Extra drying function is available only for intensive, normal, economy, glass, or 1 hour washing cycle.
• If you choose to use detergent tablet in these washing cycles, please do not add rinse aid.
Condensing dry technology
• Energy is saved by drying the dishes using the remaining heat after the last rinse cycle.
• Wash cycle times are extended due to this drying method.
• Some wash programmes do not have a drying function, please refer to the Wash Cycle Table for more
details.

Starting a Wash Cycle

1. Ensure the unit is connected to the mains power and the water supply is fully opened
(water pressure between 0.04MPa and 1.00MPa).
2. Open the door. Pull out the lower and upper baskets, load the dishes and push the baskets
back. It is recommended that the lower basket is loaded first, and then the upper basket.
3. Pour in the detergent or place the detergent tablet in the detergent compartment and
close firmly afterwards.
4. Press the On/Off button. The unit will beep and the LED display will light up.
5. Press P to select the wash cycle programme based on the loading and soil requirements.
You can also select Extra or Express Dry by pressing Option. Please refer to the Wash Cycle
Table for availability of these options per wash cycle programme.
6. Then Close the dishwasher door A click should be heard when the door is closed correctly.
Do not slam the door.
7. The indicator light will illuminate.
8. The LED on the front of the door will blink. The washing cycle will begin shortly.
• If you open the dishwasher's door during the washing cycle and then close it, the dishwasher will
continue the current washing programme after 10 seconds. However, if the door is not closed correctly
after 1 minute, the dishwasher will beep at 1 minute intervals.
• The programme light will blink while the wash cycle is running.
25